Product Description
CQuartz UK 3.0 offers incredible resistance to chemicals, salt, and environmental damage as well as provide excellent UV protection! The high silica-quartz content creates a hard glassy layer across painted or gel-coat surfaces. CQuartz UK adds incredible levels of depth to the paint along with unbelievable water and dirt repellency and a rugged durability measured in years!
Kit Includes:
- (1) 30ml bottle of CQuartz UK 3.0 (Use 15ml+/- per coat – average size car)
- (1) 100ml bottle of CarPro Reload Silica Spray
- (1) 16″ Microfiber Suede Towel
- (1) CarPro Foam Applicator Block
- (4) 4″ MF Suede applicators
- (1) Rear View Mirror Hanger (Optional)
- Now easy to use in a wide range of temps!
- Protection and gloss superior to that of competitor “professional coatings” but easy to use for all detailers
- Extremely high Sio2 Quartz content
- Deep gloss that lasts!
- Easy maintenance with “self cleaning” properties (Stays cleaner than other products on the market)
- Resistance to wash induced marring, bird dropping damage, stains, high or low temperatures, and traffic film
- Repels UV rays, water, oils, dirt, and contaminants
- Durability: 2 years or more
- Average Thickness: 1~2 Micron per coat
- Coverage 15ml per coat +/-
- Water contact angle: 110°
- Minor filling
- Recommended working temperatures: 40F to 100F
- Paint
- Metal
- Plastic
- And more
- If contamination exists it is recommended that you Iron X and clay your vehicle before polishing.
- To gain the most from Cquartz it is recommended that your vehicle have all surfaces 100% clean and paint polished to a high level
- Use CarPro Reflect to achieve an incredible high gloss finish in less time with no fillers
- Use CarPro Eraser to remove all oils leftover from Reflect – This is critical to ensure durability of CQuartz
- Wrap a 4″ mf Suede around the grey side of applicator block
- Shake CQuartz UK
- Slowly open bottle and drag one line of product across applicator
- Spread across paint in a criss cross pattern approximately 2 sq ft at a time depending on conditions
- Buff off as soon as it flashes (within 1-5 minutes depending) using a CarPro No Lint Ultra Towel 16″ x 16″
- Be sure to remove all excess residue and only then do you move to the next section
- Switch out applicators regularly
- Apply Reload before 1 hour. Wait until next day for Reload if you miss the 30-60 minute window
- Keep surface dry for at least one hour after application (For best results keep dry 24 hours)
- Gently wipe any water off the surface during the first 24 hours after application
- Avoid detergents and chemicals for 5 days after application
- If it is dry and the air is clean outside then you may park the vehicle in direct sun after application to speed the curing
- Do not apply in direct sun or on hot surface
- Do not re-use 4″ Suede applicators
- Do not re-use the towels you used to buff off with on paint
- Wear hand protection
- Wear respiratory protection such as painters mask